Analog Output Module
Cdios 6164

 

The high-lights on this module

Click for full size picture

  • About the Module
    • Small DIN rail device
    • Module of the CD systems Input Output System
    • Controlled by the Cdios Controller
      • Up to 16 Cdios Modules can be connected to one controller
    • Low Cost device
    • This Module must be connected to a Cdios Controller.
  • About the Outputs
    • 4 Analog outputs
      • Electrically Isolated
      • +10V ...-10V out
      • Resolution 0.5mV
      • Refresh rate 250/s
      • Slope control 10V/s down to 1 mV/s
  • About the Cdios Commands
    • Write / write on sync data
    • Configuration slope
  • About the Power supply
    • Switched regulator 
    • Low consumption
    • 12 ... 28 Vdc supply voltage range 
  • About the Housing
    • Small size 96 x 61 x 50 mm
    • DIN rail socket
  • About the Connections
    • I/O via detachable screw connectors
    • 10-wire Flatcable connection to previous module
    • Power via detachable screw connectors
  • About the Application areas
    • Measurement- and control equipment,
    • Process- and Machine controls,
    • Greenhouse and Agro industries.

 


Diagram

 


Connections

 


Connections Cdios module 6164

 

pin name Description
1 Gnd Supply Ground
2 Vpwr Supply Power, 12...28 Vdc
3 Gnd Ground output1
4 Vout1 Output voltage -10...+10 Vdc, output1
5 Gnd Ground output2
6 Vout2 Output voltage -10...+10 Vdc, output2
7 Gnd Ground output3
8 Vout3 Output voltage -10...+10 Vdc, output3
9 Gnd Ground output4
10 Vout4 Output voltage -10...+10 Vdc, output4

 


Short Function Description

 

Write analog outputs (direct or latched)
Set analog output slope
Read output status
Enable event on output status change
Read analog outputs

Home | Cdios

Last Modified: 1 March 2004