6170 Cdios Module 4 Analog Inputs

Four 1Volt/100mV Input Module
Cdios 6170

The high-lights on this module

About the Module
- Small DIN rail device
- Module of the CD systems Input Output System
- Controlled by the Cdios Controller
  - Up to 16 Cdios Modules can be connected to one controller
- Low Cost device
- This Module must be connected to the Cdios Controller.
About the Inputs
- 4 Analog Inputs
  - Electrically Isolated
  - +1V ...-1V inputs
  - +100mV ... -100mV
  - Resolution +/- 30000 parts (15bits +sign)
  - Synchronous read
  - Sample rate up to 50 - 200 Hz (see specs)
About the Cdios Commands
- Read /Synchronous Read input data
- Sample rate
- Average Filter setting
- Configure upper/lower/delta limit values
About the Power supply
- Switched regulator
- Low consumption
- 12 ... 28 Vdc supply voltage range
About the Housing
- Small size 96 x 61 x 50 mm
- DIN rail socket
About the Connections
- I/O via detachable screw connectors
- 10-wire Flatcable connection to previous module
- Power via detachable screw connectors
About the Application areas
- Measurement- and control equipment,
- Process- and Machine Control Systems,
- Greenhouse and Agro industries.

Connections 6170

Connections 6170
Pin	Name	Description
1	Gnd	Supply Ground
2	Vpwr	Supply power 12...28Vdc
3	Gnd1	Ground, not equal to Gnd, see specs
4	100mV	-100...+100 mV input to Gnd1
5	Volt	-1V...+1Vdc input to Gnd1
6	Gnd2	Ground, not equal to Gnd, see specs
7	100mV	-100...+100 mV input to Gnd2
8	Volt	-10V...+10Vdc input to Gnd2
9	Gnd3	Ground, not equal to Gnd, see specs
10	100mV	-100...+100 mV input to Gnd3
11	Volt	-1V...+1Vdc input to Gnd3
12	Gnd4	Ground, not equal to Gnd, see specs
13	100mV	-100...+100 mV input to Gnd4
14	Volt	-1V...+1Vdc input to Gnd4

Short Function Description

Read analog inputs (direct or latched)

Configure sample rate and amount of channels

Set input range (1Vdc or 100mV)

Set input filter (Average of 0,2,4,8,16 samples)

Set limits (Upper, Lower or Delta)