| Home |
Last Modified: 15 October 1998 |
|
6173 Evaluation Board for the
6172
The highlights on this Board
- Evaluation Board for the 6172
- Epoxy board with plated through holes
- size 100 x 160 mm (Eurocard)
- Supplied with:
- four 20 pin female connectors for the 6172
- four rubber pads
- two mounting spacers for the 6172
- Lay-out:
- Area for the 6172 with connectors
(with connection holes)
- Area with 17 x 36 plated through holes
- Area for mounting SO and SOL parts
(with connection holes)
- Area of holes for the DIN41612 connector
(with connection holes)
Description
The 6173 evaluation board can be used to build your proto type (or small
serie) Node with the 6172
Micro Controller Module.
The solder side of the board contains a ground plane.
The best way to work with this board is to place and solder the wire
connections also on the component side of the board.