Incremental Encoder
Cdios 6182

 

The high-lights on this module 

  • About the Module
    • Small DIN rail device
    • I/O device of the CD systems Input Output System
    • Controlled by the Cdios Controller
      • Up to 16 Cdios Modules can be connected to one controller
    • Low Cost device
    • This Module must be connected to the Cdios controller.
  • About the Encoder
    • Encoder input
      • 5V, Gnd
      • A, A\
      • B, B\
      • I, I\
    • Two end switch inputs
    • Emergency input
    • Flying position reset input
    • Electrically Isolated
  • About the Cdios Commands
    • Read Motor Status
      • Stop error
    • Configure
      • End switches
  • About the Power supply
    • Switched regulator 
    • Low consumption
    • 12 ... 24 Vdc supply voltage range
    About the housing
    • Small size 96 x 61 x 54 mm
    • DIN rail socket
  • About the Connections
    • I/O via detachable screw connectors
    • 10-wire Flatcable connection to previous module
    • 24Vdc power via detachable screw connectors
  • About the application areas
    • Instrumental environment
    • Measurement- and control equipment,
    • Process- and Machine Control Systems,
    • Greenhouse and Agro industries.

Diagram 6182

 

Connections 6182

 

Connections 6182

 
pin name Description
1 Gnd Supply Ground
2 Vpwr Supply Power, 12...28 Vdc
3 Gnd Ground, equal to supply Ground
4 Vpwr Vpwr equal to Vpwr
5 Fwd Forward end switch, 24Vdc
6 Rev Reverse end switch, 24 Vdc
7 Emg Emergency end switch, 24 Vdc
8 Z And with Index  function, 24 Vdc
9 Gnd Ground, equal to supply Ground
10 +5V V output 5 Vdc
11 A\ Encoder input A\
12 A Encoder input A, or single A input with A\ open
13 B\ Encoder input B\
14 B Encoder input B, or single B input with B\ open
15 I\ Encoder Index input I\
16 I Encoder Index input I, or single I input with I\ open
 

Short Function Description 6182

 
Get position
Set position
Read speed

Home | Cdios | DC Motor Controller

Last Modified: 16 January 2004